Printer Driver Download Brother MFC-J5335DW
Brother MFC-J5335DW Printer Driver Download. The Brother MFC-J5335DW is a 4-in-1 inkjet printer that prints in A3 and scans A4 documents. Sold € 229 (list price) and is the result of the Business Smart range, it is mainly aimed at professionals to whom it proposes a cost on page rather advantageous. Due to its print format, this Brother MFC-J5335DW printer is obviously a relatively large printer. However, its 53 x 39.8 x 30.4 cm remain acceptable for its category. Even its weight of 16.9 kg remains in the standards. It should nevertheless be said that if the general quality of manufacture is not bad, it could still be better (plastic rails, cassette and foldable shutters plastic rather cheap).
Driver Download Brother MFC-J5335DW Printer Installer
The automatic document feeder on the top is convenient to use even for batch scanning, which is always useful for fax enthusiasts. By opening this cover, we come face to face with the scanner that is compatible only with the A4 format. To digitize in A3, you will have to go through a software solution to put two digitized pages together. The main paper source, the lower cassette can store up to 250 standard sheets (80 g / m²), both in A4 and A3.
Brother MFC-J5335DW Driver Printer Download
Printer Driver Brother MFC-J5335DW Download
However, you can not reserve a package of sheets of each size ready to be printed. You will need to empty the cassette and fill it only with paper of the intended size, or use the manual paper feeder on the back of the printer. Note that in A4 the paper loads in the width of the tray and is therefore printed in landscape orientation. I will see below if this has a positive impact on the printing speed. At the back, a shutter now gives access to the paper feed rollers, which allows to intervene in case of paper jam.
Driver Printer Download Brother MFC-J5335DW
The entire connector part of this Brother MFC-J5335DW printer is located at the center flap. The printer must be opened in half to access its USB port, its RJ45 port and its two RJ11 ports. As with the recently tested MFC J985DW, I regret that this system gives rise to the use of preformed trunking to organize cables, which can be problematic in some cases, since the space left in the cables is not Necessarily sufficient and may be inconvenient if a cable with a ferrite is used, for example. In addition, it loses in length of cable.
DOWNLOAD DRIVER (All Brother printer drivers and software from Official Source):